Temperature Alarm Buying AdviceWhat happens if your furnace or electricity
breaks out while you are away from your house, cabin, office,
or factory during the winter, you could be in a very serious
trouble. To protect your property being damaged, you can
simply install a temperature alarm to your residence. Modern
temperature alarms can save you from a nightmare by alerting
you or a neighbor when the temperature inside reaches the
point that you have set, from -66 degrees F to 302 degrees F
(-55 degrees to 150 degrees C) before damage occurs to your
house belongings. The device is ideal for both normal
consumers for their cabins, homes, and garages and for
commercial temperature monitoring applications like in
greenhouses, computer rooms, refrigeration, air conditioning,
and boilers. |
 |
The alarm will automatically dial up to 3 phone numbers and
transmits your custom voice message identifying location and
temperature status, giving you or a neighbor a chance to remedy the
problem or at least call for somebody to take care the situation.
The alarm keeps dialing (selectable 15-minute or 2-hour call-out
interval) and will not reset until you turn it off remotely from any
touch-tone phone. It is also an option if you want to call in at any
time to check the temperature of your property or to change any of
the settings.
The temperature sensor is designed to operate
on a 3' power cord, which is extendable to 1000'. It can be plug
into various standard outlets and phone jacks. This unit also has
battery backup to operate during a power failure (when the power is
out, unit will automatically call out to notify of power loss); it
will even remind you to change the back-up battery by giving out
signal sounds. It is programmable from any touch-tone phone you are
available to use.
The temperature alarm automatically calls
three phone numbers when an alarm condition occurs; can also call a
numeric pager and send a numeric message on the pager display if it
is preset. It will call the numbers if things like temperature gets
out of range, power goes out, or if the back-up battery requires
replacing. Quick Status Check function allows users to check the
current temperature, power, and battery status within a 15-second
using phone call. Auxiliary alarm connection allows you to add
optional sensors (security, fire alarm, water level, etc.). With the
temperature alarm, you can also remotely switch a relay between two
thermostats and warm up your home or cabin before you arrive.
Every temperature alarm varies slightly, but most operate on
the same premise: it alerts you, usually via phone, when the
temperature inside your home surges or drops out of the temperature
range you set for it. When you receive a pre-recorded voice message
from the temperature alarm, you can then remotely respond and take
immediate action to protect your properties.
|
|
|
